User Guide
Step 4 : Uninstall the rack mount Rails.
a. From the front of the rack, using the T15 Torx screwdriver, uninstall the M5 Torx screw that
secure the front of the rack mount Rails and bracket to the rack.
Figure 81: Uninstall Front Rack Mount
b. From the rear of the rack, using the T15 Torx screwdriver, uninstall the two M5 Torx screws
that secure the rear of the rack mount Rails to the rack. Remove the Rail from the rack by
rotating the front mount out and pulling the rear mount out of the rack.
3. Support
3.7 Rails Replacement
61