Western Digital OpenFlex Data24 DCS0010 User Manual page 61

User Guide
Figure 69: Power Supply Unit (PSU) Release Latch Operation
b. Carefully pull the Power Supply Unit (PSU) out of the Power Supply Unit (PSU) slot.
Figure 70: Uninstall Power Supply Unit (PSU)
Step 4 : Install the Power Supply Unit (PSU) into the enclosure.
a. Orient the Power Supply Unit (PSU) with the power port located on the top and insert it into
the Power Supply Unit (PSU) slot. The location of the power port is shown in the following
image.
3.6 Power Supply Unit (PSU) Replacement
3. Support
54