User Guide
Figure 39: Sliding the Retention Clip Forward
c. Connect the Ethernet Cable into the Ethernet Management port.
Figure 40: Connecting RJ45 Ethernet Cable to Management Port
d. Connect the QSFP28 cables into all of the IOM ports.
Figure 41: Connect QSFP28 Cables
e. Move to the rear of the rack and connect the power cables into each of the two Power
Supply Unit (PSU) power connectors.
3. Support
3.2 Chassis Replacement
37
Need help?
Do you have a question about the OpenFlex Data24 DCS0010 and is the answer not in the manual?
Questions and answers