Western Digital OpenFlex Data24 DCS0010 User Manual page 50

User Guide
b. Carefully slide the Chassis out of the rack until the System Fan bay is completely accessible
and the locking tabs on the side of the chassis have stopped the OpenFlex Data24 and
locked it in place. The System Fan bay accessibility is shown in the following image.
Figure 50: System Fan Bay Access
Step 3 : Uninstall the System Fan from the enclosure.
a. Unlatch the System Fan bay cover by sliding both latches in towards the center of the
Chassis until the cover is released and can rotated open on its hinges. The latch operation is
shown in the following image.
Figure 51: System Fan Bay Cover Latch Location
3. Support
3.4 System Fan Replacement
43