Western Digital OpenFlex Data24 DCS0010 User Manual page 65

User Guide
Figure 76: Disconnect RJ45 Ethernet Cables
d. Disconnect the QSFP28 cables from all of the IOM ports.
Figure 77: Disconnect QSFP28 Cables
Step 3 : Uninstall the Chassis from the rack mounted rails.
a. From the front of the rack, using the T15 Torx screwdriver, loosen the two Torx captive
screws that secure the Chassis to the rail. Repeat this step to loosen the two Torx captive
screws that secure the Chassis to the remaining rail. The location of the captive screws are
shown in the following image.
3. Support
3.7 Rails Replacement
58