Western Digital OpenFlex Data24 DCS0010 User Manual page 35

User Guide
a. From the front of the rack, using the T15 Torx screwdriver, loosen the two Torx captive
screws that secure the Chassis to the rail. Repeat this step to loosen the two Torx captive
screws that secure the Chassis to the remaining rail. The location of the captive screws are
shown in the following image.
Figure 25: Rack Ear Captive Screw Location
b. Carefully pull the Chassis out of the rack. The chassis will slide out of the rails until the
locking tabs on the side of the chassis engage and stop the chassis from being pulled out
further.
c. Depress the locking tabs on the sides of the chassis to allow it to be removed from the rails.
3. Support
3.2 Chassis Replacement
28