Western Digital OpenFlex Data24 DCS0010 User Manual page 33

User Guide
Figure 20: Power Supply Unit (PSU) Release Latch Operation
b. Carefully pull the Power Supply Unit (PSU) out of the Power Supply Unit (PSU) slot.
Figure 21: Uninstall Power Supply Unit (PSU)
Step 6 : Uninstall the remaining Power Supply Unit (PSU) in the same way the first was uninstalled.
Step 7 : Uninstall the IO Module (IOM) from the enclosure.
a. Unlock the IO Module (IOM) by turning the thumbscrew counterclockwise until the screw
threads are not engaged any longer. The location of the thumbscrew is shown in the
following image. A screwdriver may be used if desired.
3. Support
3.2 Chassis Replacement
26