Western Digital OpenFlex Data24 DCS0010 User Manual page 59

User Guide
Figure 66: IO Module (IOM) Handle Engaged
c. Press the release handle into the IO Module (IOM) and secure it in place by turning the
thumbscrew clockwise until it is tight.
Figure 67: IO Module (IOM) Secure
d. Verify that the IO Module (IOM) is securely latched into the Chassis by pulling on the release
handle and ensuring the IO Module (IOM) does not move when pulled. Reinstall the IO
Module (IOM) if it is not securely installed into the Chassis.
3.5 IO Module (IOM) Replacement
3. Support
52