Safety Instructions; Warning Symbols On The Device; Qualified Personnel; The 5 Safety Rules - Siemens SINAMICS PERFECT HARMONY GH150 Operating Instructions & Installation Instructions

Safety instructions

In the individual chapters of this document, you will find safety instructions that must be obeyed
absolutely, for your own safety, to protect other people and to avoid damage to property.
Carefully comply with the following safety instructions when performing all of the activities.
2.1

Warning symbols on the device

Please observe the warning symbols attached to the device. The warning symbols have the
following meaning:
Warning symbol
For transportation, observe the "transportation markings (Page 61)" on the device packaging.
2.2

Qualified personnel

The product/system described in this documentation may only be operated by personnel
qualified for the specific task in accordance with the relevant documentation for the specific
task, in particular its warning notices and safety instructions. Because of their training and
experience, qualified personnel can recognize any risks involved with handling these products/
systems and avoid any possible dangers.
2.3

The 5 safety rules

For your own personal safety and to prevent material damage when carrying out any work,
always observe the safety-relevant instructions and the following five safety rules according to
EN 50110‑1 "Working in a voltage-free state". Apply the five safety rules in the sequence stated
before starting work.
SINAMICS PERFECT HARMONY GH150 6SL38253AE412AA1-Z
Operating Instructions Rev.201910281231 EXAMPLE
Meaning
Warning: Voltage
Warning: Hot surface
General warning symbol: Observe the explanations about the hazard on the
device labels.
2
15