Table of Contents
Advertisement
U
R
SING THE
OBOT
S
M
ERVICE
ENU
4)
Press
to accept the time zone.
5)
Press
to exit the menu.
To set the language:
1)
Press
.
2)
Press the arrow keys to highlight Regional
parameters, then press
3)
Press
to highlight Language.
4)
Press
.
5)
Use
and
language.
6)
Press
to accept the language.
7)
Press
to exit the menu.
11.4.2 Connections
To display the connections screen:
1)
Press
.
2)
The Connections screen will display. Use the
arrow keypad to select an option.
IP address
Select to display the current IP address of the robot,
depending on the mode on which it is operating.
Modes can be mobile, vpn, or WiFi.
48
.
to highlight the required
Mode
Select to set the mode in which the robot is to operate.
Mode selections are:
•
OFF - The robot will not be connected to a
network.
•
Client - The robot will connect to the selected
network as a client.
•
Access point - The robot will use its inbuilt
modem to generate its own WiFi network to
which you can connect.
Search for networks
This option appears when the robot is not connected or
cannot detect a WiFi network.
SSID
This displays the name of the WiFi network to which
the robot is connected, and allows you to modify it.
Highlight {network name} and press
A list of networks will display.
•
Entries in bold text are ones that the robot has
connected to.
•
Entries in normal text are available but which
have not been used.
•
[*] indicates the actual network to which the
robot is connected.
•
[!] indicates that the network to which the robot
is connected, is not encrypted using either WPA
or WPA2 technologies. This is therefore an inse-
cure network and the [!] indicates a warning.
•
[-] indicates that the network has been disabled.
•
To connect to a different known network, high-
light the network, press
Network.
•
To modify the current network, highlight the
network, press
available:
–
Disable Network - Disconnects the
robot from this network.
–
Change Password - Allows modification
of the password to access the network
from the robot.
–
Forget Network - Removes the recogni-
tion of this known network from the
robot.
.
and select Enable
. The following operations are
Advertisement
Table of Contents
