Brake Fluid - Mitsubishi FUSO FH 1997 Service Manual

LUBRICATION

Brake Fluid

Ê Tightening torque
Location
2 Air bleeder
- Fluid
Location
1 Fluid tank
0 Special tools
Location
2 Vinyl hose
01-38
Parts to be tightened
Points of application
Tool name and shape
1200 {47.2}
ø7 {0.28}
WARNING–
• The clutch fluid system and the brake fluid system use the fluid
• You must use new brake fluid (SAE J1703f or FMVSS No.116
• Do not allow foreign particles or water to become mixed into the
• If you use a mug for adding brake fluid, keep it solely for that
CAUTION–
• Be careful not to splash brake fluid on related parts as this could
• Be sure to wipe off brake fluid immediately if you splash it on the
NOTE
Tightening torque
7.8 to 12 {5.8 to 8.5, 0.8 to 1.2}
Brake fluid
(SAE J1703f or FMVSS No.116 DOT3)
Part No.
MH033102
00328
tank in common.
DOT3). Do not add different quality fluid or mineral oil (gas oil,
engine oil, gear oil, automatic transmission fluid, etc.) to the
clutch system, because this will cause the rubber parts of the
clutch system and brake system to swell, resulting in faulty
clutch operation, as well as ineffective braking and brake drag-
ging.
brake fluid when refilling, because this will result in ineffective
clutch and brake operations.
purpose.
damage the paintwork.
paintwork.
Supply and maintain brake fluid level to the "MAX" level of the
fluid tank .
Unit : N·m {lbf.ft, kgf·m}
Specified fluid
Unit : mm {in.}
Application
Air bleeding
Remarks
—
Quantity
As required