Cleaning And Replacement Of Air Cleaner Element - Mitsubishi FUSO FH 1997 Service Manual

Cleaning and Replacement of Air Cleaner Element

2
1
2
2
[Removal]
Remove wing nut 1 to remove element 2.
[Installation]
Install element 2 securely.
02208
[Cleaning]
• Blow compressed air of 685 kPa {100 lbf/in
air cleaner element 2 from the inside.
• When using compressed air, move the blower's nozzle up and down
along the pleats of air cleaner element 2 evenly.
CAUTION–
• Do not tap or hit air cleaner element 2 to remove dust.
• Do not blow compressed air through air cleaner element 2 from
the outside.
00735
[Inspection]
• Illuminate the inside of air cleaner element 2.
• If parts of the filter paper are torn or thin, or if the packing of the upper
surface of air cleaner element 2 is damaged, replace the air cleaner
element.
NOTE
If the dust on air cleaner element 2 is wet due to oil smoke or
soot, replace the air cleaner regardless of the scheduled replace-
00736 ment interval.
01
2 , 7 kgf/cm 2 } or less through
01-13