Table of Contents
Advertisement
Manual Transmission Gear Oil
Ê Tightening torque
Location
1
Inspection plug
2
Drain plug
- Sealant
Location
1
Thread area of inspection plug
2
Thread area of drain plug
2
Parts to be tightened
Points of application
WARNING–
[Inspection and replenishment]
1
• Remove inspection plug 1 and check whether the oil level is up to the
• If the level is low, add oil through the inspection plug hole until the
02199
[Replacement]
• Drain the oil after removing inspection plug 1 and drain plug 2.
• Remove any metal particles sticking to the magnetic part of drain plug
• Add oil through the inspection plug hole until the level comes up to the
• Insert inspection plug 1.
02336
Tightening torque
69±15 {51±11, 7±1.5}
69±15 {51±11, 7±1.5}
THREEBOND 1105D
THREEBOND 1105D
The engine is hot immediately after the vehicle stopped, so take
care not to burn yourself.
edge of the entrance.
level comes up to the edge of the entrance.
2 before reinstalling the plug.
edge of the entrance.
Unit : N·m {lbf.ft, kgf·m}
Specified sealant
01
Remarks
—
—
Quantity
As required
As required
01-31
Advertisement
Table of Contents
