Mitsubishi FUSO FH 1997 Service Manual page 181

CAMSHAFT
9, 10, 12, 13
B
12
C
40°
*
12
D
F
E
10, 13
10
G
40°
0
11-32
• For press-fitting, mount guide B to 0 camshaft bushing installer and
extractor.
• Install camshaft bushings 9, 10, 12, 13 in descending order, from
No.4 to No.1.
• Install No.4 camshaft bushing 12 from the rear end of the engine, and
0
No.3 to No.1 camshaft bushings 9, 10, 13 from the front end of the
engine.
06225
• Align oil hole C of No.4 camshaft bushing 12 in the direction as
illustrated.
12695
• Press in until surface D of No.4 camshaft bushing 12 is flush with
chamfered part E of crankcase *.
F : Front of the engine
0
06231
• Align oil hole G, of No.2 to No.3 camshaft bushings 10, 13, in the
13
direction as illustrated, and press-fit in the order of No.3, 2.
12696
• Press in until surface H of No.2 to No.3 camshaft bushings 10, 13 is
*
flush with surface J of crankcase *.
F : Front of the engine
F
H
J
10, 13
06229