Brake Fluid - Mitsubishi FUSO FH 1997 Service Manual

LUBRICATION

Brake Fluid

Ê Tightening torque
Location
— Air bleeder (Airmaster)
— Air bleeder (Wheel brake)
- Fluid
Location
— Fluid tank
0 Special tools
Location
— Vinyl hose
01-38
Parts to be tightened
Points of application
Tool name and shape
1200 {47.2}
ø7 {0.28}
WARNING–
• You must use new brake fluid (SAE J1703f or FMVSS No.116
• Do not add different quality fluid or mineral oil (gas oil, engine oil,
• Be sure not to allow dirt or water to become mixed into brake
• If you use a mug for adding brake fluid, keep it solely for that
CAUTION–
• Be careful not to splash brake fluid on related parts as this could
• Be sure to wipe off brake fluid immediately if you splash it on the
NOTE
Tightening torque
6.9 to 12.7 {5.1 to 9.4, 0.7 to 1.3}
7.8 to 12 {5.8 to 8.5, 0.8 to 1.2}
Brake fluid
(SAE J1703f or FMVSS No.116 DOT3)
Part No.
MH033102
00328
DOT3).
gear oil, automatic transmission fluid, etc.) to the brake system,
because this will cause the rubber parts of the brake system to
swell, resulting in brake dragging or ineffective braking.
fluid when refilling, because this will cause the brake to
malfunction.
purpose to prevent contamination from different quality fluids or
mineral oils.
damage the paintwork.
paintwork.
Supply brake fluid to maintain the "H" level of the brake fluid tank
always.
Unit : N·m {lbf.ft, kgf·m}
Kinds
Unit : mm {in.}
Application
Air bleeding
Remarks
—
—
Quantity
As required