Batteries And Battery Box - Honeywell Gent Vigilon Installation Instructions Manual

Technical data
Access level 2b
Access level 3
Menus
Logs
Printer

Batteries and Battery Box

The batteries provide 24/72 hour standby supply plus power to alarm load for
30 minutes. The 'Battery Standby and Loop Load Calculator' tool can be used to
determine the load on the loop to achieve the standby power in the event of mains
failure. The battery box is only used with the VIG1-72 panel and can be installed in
a remote location up to 10m cable distance away from the control panel when using
1.5mm MICC. When using 2.5mm
2
15m.
Battery box dimensions in mm
Terminals
Battery box weight (including
batteries)
Battery
Temperature monitoring
Always use the recommended replacement batteries, as there is
a risk of an explosion if incorrect battery is used. Dispose of used
batteries according to the manufacturer's instructions.
18
www.acornfiresecurity.com
Customer (Customer PIN)
Access as level 2a plus access to complete level 2 menu
commands.
Engineering (Engineers PIN)
Access as level 2b plus access to all level 3 menu commands.
[Control], [Setup], [Information] and [Test Engineering] menus.
Active Logs: Fire, Fault and Disablement
Historic log: All events
Event logs: Fault, Disablement, Warning, Supervisory, Exceptions
and Historic fi res. (up to 255 events)
Fire Log (up to 100 events)
The integral printer if fi tted operates when the outer door is open.
The 'printer menu' include: ON, OFF, Line feed and Test print
controls. An optional remote printer can be connected to the panel.
MICC then the cable length can be increased to
2
height 437 x width 421 x depth 174
Accept cable size of up to 2.5mm
31.2Kg with 4 batteries
55.2Kg with 8 batteries
1 x 12V 21Ah battery weight is 6Kg
VIG1-24 Batteries installed in the panel
2 x Powersonic 12V 21Ahr - (supplied)
Model number PG12V21 B
VIG1-72 Batteries installed in a battery box
4 x Powersonic 12V 21Ahr - (supplied)
Model number PG12V21 B
The battery box can optionally accommodate up to
8 x Powersonic 12V 21Ah
Inside the VIG1-24 panel and in the battery box for
VIG1-72 panel - for automatic adjustment of battery
charge voltage with change in temperature.
www.acornfiresecurity.com
2