Connecting a Remote printer
Connecting a Remote printer
An IO card (not supplied) must be inserted in slot 2 of the backplane of the panel,
which will facilitate remote printer functionality. When a remote printer is connected to a
standalone Vigilon control panel, it will print local system events.
Thermal printer
Terminals for
IO card configured for
Remote printer
(rotary switch position 2)
fitted in slot P2 of the backplane
If the
IO card to which a
remote printer is connected
is installed in a spare slot
on the backplane then use
the corresponding terminals
32
www.acornfiresecurity.com
9-way D-type connector
Hand held printer
RS485
A 5V B 0V
P4
Terminal card
PANEL / NODE
www.acornfiresecurity.com
RS232
Tx CTS Rx RTS