Installing The Batteries; Enclosure Cover; Instalation - Honeywell NFS Supra Installation And Operating Manual

Conventional fire alarm control panel
Table of Contents

Advertisement

NFS Supra
Installation
CAUTION - ENERGY HAZARD!
NEVER short the battery terminals.
CAUTION - RISK OF EXPLOSION!
If battery is replaced with an incorrect type.

3.4.3 Installing the Batteries

The batteries must be located in the dedicated space in the lower part of
the NFS Supra enclosure that has space provision for two 7Ah,12V
sealed lead batteries.
• Orientate the batteries so that the wiring connection terminals of each
unit are adjacent to each other (as shown opposite) then offer each
in turn to the enclosure.
• Locate the batteries in their right position inside the enclosure.

3.4.4 Enclosure Cover

The control panel has a cover (door) to close the enclosure at the end of
the installation.
Use 4 screws to fix the cover on the enclosure.
HLS-MN-025 v.04
Installation and Operating Manual
www.honeywelllifesafety.es
Page 20
www.hoeywelllifesafety.es

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ess-2plusVsn-2plus

Table of Contents