Table of Contents
Advertisement
•
Read and understand all instructions and safety warnings prior to installation and use.
•
Equipment must be installed as required by the instructions.
•
Do not use this equipment outside of its intended purpose, or if site conditions would pose a dangerous installation.
•
To be installed and operated only by an adult. Not to be used by children.
•
Never install in areas where swimming is allowed or where people enter the water.
•
Never use in a swimming pool.
•
Do not use this equipment for intentional weed removal, sediment removal or dredging.
•
Follow all local and national electrical wiring rules for the electrical circuit feeding this equipment. Failure to comply may result
in injury.
•
All equipment must be powered from an RCD (residual current device) or GFCI (ground fault circuit interrupter) protected cir-
cuit.
•
Do not modify any mounting hardware or guarding provided with this equipment. All guarding purchased with a unit must be
installed.
•
This equipment is intended to operate without interaction from personnel. Never to be manipulated, moved, maintained, or ad-
justed while in operation. Damage or injury could result.
•
The general public must be made aware of the installation and warned of the installation to prevent misuse or interference with
the equipment.
•
This equipment is intended to be used in water only. The equipment should only be operated out of water if required to trouble-
shoot operation and during initial startup of the equipment. The instructions provide detailed warnings and instructions for such
activities and should only be performed by a trained person.
The Electrical circuit must be provided to supply sufficient voltage and amperage to the unit. These ratings are listed in the above
table (unit specs). This circuit must also include a disconnect means and short circuit protection.
Installation requirements:
Unit Specs
Model
Voltage
range
4400EJ
208-240
8400EJ
208-240
3.1EJ
208-240
2.3EJ
190
3.3EJ
190
5.3EJ
190
2.3EHJ
380
3.3EHJ
380
5.3EHJ
380
Utility requirements:
Operating
lock rotor
amps
amps
6.5@220V
20@220V
9.5@220V
40@220V
13.2@220V 60@220V
6.4
41
10
69
15.2
98
3.3
21
5
34
7.7
49
3
Advertisement
Table of Contents
