Table of Contents
Advertisement
Industrial Electronic Devices
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip1 of 'Dip-Switch A':
The first, with Dip1 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip1 in On position, is used for upload the Project/Firmware.
For the operations to follow for the updating (see 'UPDATE DEVICE' section).
According to the functioning mode, the LEDs will have specifics functions (see 'LEDS' section).
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual IEC61850 Client / Modbus TCP Slave
Document code: MN67766_ENG
INFO:
www.adfweb.com
Revision 1.000
Page 8 of 28
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67766-A1 and is the answer not in the manual?
Questions and answers