Menu Operation; Hide Menu Items; 6.10 Location; Configure Handset For Cisco/Ekahau Rtls Solution - Alcatel-Lucent OmniTouch 8118 Configuration Manual

Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
6.9

Menu Operation

6.9.1

Hide Menu Items

It is possible to hide menu items for the users. To hide or show a menu item, do the following:
1 Select Customization > Visibility.
2 Select "Hide", "Show", or "Hide admin" for the applicable menu item in the drop-down
list. If "Hide admin" is selected, the menu item will be visible in the VoWiFi Handset,
but cannot be edited by the user. The following items can be hidden:
• Connections (Network, Headset etc.)
• Profiles
• Settings (Sounds, Display, Language etc)

6.10 Location

Two types of location are supported, either a basic location solution that gives an approximate
location using Access Point (AP) location, or a personal security solution that gives a more
accurate location using a third-party Real-Time Location System (RTLS) solution.
The following RTLS solutions are supported:
• Cisco RTLS Solution
In order to use the Cisco RTLS solution, a Cisco Mobility Services Engine must be used and
configurations in the VoWiFi Handset are required.
• Ekahau RTLS Solution
In order to use the Ekahau RTLS solution, the VoWiFi Handset must be configured.
6.10.1

Configure Handset for Cisco/Ekahau RTLS Solution

1 Select Location > Common.
2 In the Location scanning drop-down list, select "Enable".
3 In the Scanning interval
4 In the Scans per scanning period
performed during each scanning period.
1. Note that close scanning periods, and frequently scans per period, will shorten the battery time.
26 June 2012
1
field, set the time between the scanning periods.
1
drop-down list, select how many scans that should be
24