Create A Template; Apply A Template To A Handset With A Number; Apply A Template To Handset Without A Number - Alcatel-Lucent OmniTouch 8118 Configuration Manual

Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
Your supplier can provide example templates for different PBX:s. The VoWiFi Handset will
have full functionality towards the PBX even without such a template. By using such a
template, though, the VoWiFi Handset will be customized for that PBX with menu options for
PBX specific functions.
4.3.1

Create a template

1 Open the WinPDM.
2 Select the Templates tab and open the menu "Template > New...". The New Template
window is opened.
3 Select the device type and parameter version that matches the software version installed
on the VoWiFi Handset. Give the template a descriptive name.
The parameters that are not part of the template will be left unchanged on the VoWiFi Handset.
The parameter version of an installed VoWiFi Handset is visible under the Numbers tab or the
Devices tab.
4 Click "OK".
5 Select the checkbox of each parameter that you want to be part of this template and enter
the proper value.
6 Click "OK" to save the template.
4.3.2

Apply a Template to a Handset with a Number

1 Open the WinPDM.
2 In the Numbers tab, select the VoWiFi Handset(s) you want to apply the template to.
Note: If several VoWiFi Handsets shall be selected, they must be of the same device type and
have the same parameter version.
3 Make a right-click and select "Run template...".
Only templates with a parameters version matching the selected VoWiFi Handsets will be
shown. Select the template you want to apply and click "OK".
The template is applied. The number of parameters in the template will affect the time it takes to
apply the template to the selected VoWiFi Handsets.
When looking at a VoWiFi Handset under the Numbers tab, the column "Last run template" will
show the name of the most recently applied template.
4.3.3

Apply a Template to Handset without a Number

It is possible to apply a template to a VoWiFi Handset without a number in the WinPDM.
1 Put the VoWiFi Handset in the DP1 cradle.
2 In the Found Device Wizard window, select the "Run template" option.
3 Click "Next >".
Only templates with a parameter version matching the selected VoWiFi Handset will be shown.
4 Select the template that shall be applied and click "OK".
The template is applied. The number of parameters in the template will affect the time it takes to
apply the template to the selected VoWiFi Handset.
26 June 2012 8