Battery Warning; Uploadable Language; Select Default Language; Telephony - Alcatel-Lucent OmniTouch 8118 Configuration Manual

Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
3 The following settings for the profile can configured:
• Profile name
• Ring volume
• Vibrator
• Key sound
6.5.5

Battery Warning

1 Select Device > Settings
2 In the Battery warning drop-down list, select one of the following:
• Sound repeatedly
• Sound once
• Sound off
6.5.6

Uploadable Language

It is possible to upload one additional language to the VoWiFi Handset. The language file is
generated via an Excel file. The Excel file used to generate language files is delivered from your
supplier.
Note: If another language file is uploaded, the first additional language is overwritten.
Certain special characters are allowed when generating the language file, see information in the
Excel file.
To upload an additional language, do as follows:
1 In the Devices tab, select the device(s) to be uploaded with additional language.
2 In the Device menu, select "Upload language...".
3 If the uploaded language shall be used in the VoWiFi Handset, see
Language
6.5.7

Select Default Language

Defines he default operating language for the VoWiFi Handset. This setting can later be changed
by the user.
1 Select Device > Settings.
2 In the Language drop-down list, select the language to be used.
3 If the downloaded language is selected, it might be needed to select matching characters
as text input language, and the sort order in the phonebook
In the Input Language drop-down list, select the text input language to be used.
Note: This parameter is only applicable for the downloaded language and cannot be
changed by the user.
6.6

Telephony

The following parameters are required for the basic telephony settings.
6.6.1

Codec

This setting defines how to packetize and compress the sound in a voice call.
In the Codec packetization time configuration drop-down list, select packetization time to use
for speech (value between 10 and 60 ms). Default value is 20 ms.
26 June 2012
for more information.
6.5.7 Select Default
22