Upgrade Software Via Winpdm; Recapture The Earlier Software; Perform A Factory Reset - Alcatel-Lucent OmniTouch 8118 Configuration Manual
Wlan handset
Hide thumbs
Also See for OmniTouch 8118:
- User manual (29 pages) ,
- User manual (30 pages) ,
- User manual (15 pages)
Table of Contents
Advertisement
Configuration Manual
Alcatel-Lucent OmniTouch 8118/8128 WLAN Handset
Configure Access to the TFTP Server
1
Put the VoWiFi Handset in the DP1 cradle.
2
Open the WinPDM.
3
Open the Numbers tab and select the VoWiFi Handset.
4
Make a right-click and click "Edit parameters".
5
Select VoIP>NOE>firmware TFTP IP address.
6
In the Software TFTP IP address field, enter the IP address to the TFTP server.
7
Click "OK".
5.1.3
Upgrade Software via WinPDM
Software upgrade via WinPDM is used in small VoWiFi systems. The VoWiFi Handsets need to
be collected by the administrator due to the software upgrade is performed via the Desktop
Programmer DP1 connected to WinPDM.
1
Open the WinPDM.
2
In the Devices tab, right-click the VoWiFi Handset to be upgraded. Select "Upgrade
software...".
3
In the Available files drop-down list, select the desired software file (.bin).
If needed, import the software file to be used by clicking "Import". Locate the software
file (.bin or .pkg) and click "Open".
4
Click "OK".
5.1.4
Recapture the Earlier Software
The VoWiFi Handset stores two software versions which makes it possible to force the VoWiFi
Handset to jump back to the earlier software. This feature shall be used if the current software
does not work properly.
Note: The VoWiFi Handset must be switched off to be able to load the earlier software.
Press and hold the keys "7" and "8" and press On/Off key at the same time. The VoWiFi
Handset loads the earlier software and will keep it as long it is not restarted.
5.1.5
Perform a Factory reset
When a factory reset is done on a VoWiFi Handset, all configuration settings will be restored to
default values; PBX subscriptions, contacts, messages, downloaded language, certificate etc.
will be removed. The software and licenses will be left intact.
Factory Reset using WinPDM
1
Open the WinPDM.
2
Put the VoWiFi Handset in the DP1 cradle.
3
In the Device tab, mark the VoWiFi Handset to be facory reset. Note that the VoWiFi
Handset must be online.
4
In the Device menu, select "Factory reset". Alternatively, right-click the VoWiFi Handset
and select "Factory reset".
5
A Reset devices window appears, click "Yes". The VoWiFi Handset will be restarted.
26 June 2012
11
Hide quick links:
Advertisement
Table of Contents
