Adsp-Cm403F Ez-Kit Lite Hardware Reference - Analog Devices ADSP-CM403F EZ-KIT Lite Manual

2 ADSP-CM403F EZ-KIT LITE
HARDWARE REFERENCE
This chapter describes the hardware design of the ADSP-CM403F
EZ-KIT Lite board.
The following topics are covered.
• System Architecture
Describes the board's configuration and explains how the board
components interface with the processor.
• Software-Controlled Switches (SoftConfig)
Lists and describes the processor signals routed through the soft-
ware-controlled switches.
• Push Buttons and Switches
Shows the locations and describes the push buttons and switches.
• Jumpers
Shows the locations and describes the configuration jumpers.
• LEDs
Shows the locations and describes the LEDs.
• Connectors
Shows the locations and provides part numbers for the on-board
connectors. In addition, the manufacturer and part number infor-
mation is provided for the mating parts.
ADSP-CM403F EZ-KIT Lite Evaluation System Manual 2-1