Siemens SIMATIC NET CP 343-2 Manual page 73

5.2.12 Select Autoprogramming
Meaning
This call can enable or disable the "automatic address programming" function (see
also Section 7.1).
The AUTO_ADDR_ENABLE bit is stored permanently; in other words, it is
retained after a warm/hot restart on the AS-i master.
Structure of the Job Data in the Send Buffer
Byte
0
1
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04
Bit 7
0
5 Using the Command Interface
Meaning
Bit 1
Command number: 0B
H
Value for AUTO_ADDR_ENABLE
1= Automatic address program-
0= Automatic address program-
Bit 0
ming enabled
ming disabled
73