Siemens SIMATIC NET CP 343-2 Manual page 20

1 Technical Description
Characteristics of the Slave Display
S If the CP 343-2 is in the configuration mode, all detected AS-i slaves are
displayed.
S If the CP 343-2 is in the protected mode, all activated AS-i slaves are
indicated by the LED being permanently lit. Failed or existing but unconfigured
AS-i slaves are indicated by the corresponding LED flashing.
B
Figure 1-4 Examples of the Display of Detected and Activated AS-i Slaves on the Front Panel of the
CP 343-2
20
Example 1
Indicates that the slaves with
addresses 1, 2 and 5 are detected
and activated.
Example 2
Indicates that the slaves with
addresses 20, 21 and 22 are
detected and activated.
B
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04