Siemens SIMATIC NET CP 343-2 Manual page 29

Configuring Properties of the CP 343-2 / CP 343-2 P
To view general information, addresses, and operating parameters and to configure
or modify them, change to the Properties dialog of the CP 343-2 / CP 343-2 P.
S "General" Tab
Here, you can change the name of the CP.
S "Addresses" Tab
Start addresses:
must be identical for inputs and
outputs.
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04
3 Configuration with STEP 7
Reserved length:
S
In the default setting, 16 bytes
are reserved;
29