Siemens SIMATIC NET CP 343-2 Manual page 6

Preface
We recommend the following procedure when...
... You want an overall picture of the AS-Interface.
− First read 'AS-Interface − Introduction and Basic Information' (on the
accompanying product CD). This contains general information about the
AS-Interface, abbreviated to AS-i in the following chapters.
... You want to set up an AS-i system and include the CP 343-2 module in it:
− You will find the relevant information about connecting and operating the
CP 343-2 in Chapter 1, 2 and 3.
... You want to know how to operate the CP 343-2 from the PLC:
− Read Chapter 4.
− Chapter 5 explains the command interface.
Requirements
To understand this manual, you require the following:
S Basic knowledge of SIMATIC S7, STEP 7
S Familiarity with the manual 'AS-Interface − Introduction and Basic Information'
(on the accompanying product CD).
CD with sample program
The accompanying CD contains a sample program for operating the CP 343-2.
FAQs
You will find FAQs on Siemens AS-i products on the Internet on the Service and
Support pages of Industry Automation at the following address:
http://support.automation.siemens.com/WW/view/en/10805888
-
6
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04