Becker Centronic SunWindControl SWC62 Assembly And Operating Instructions Manual page 55

FUNCTION
(only when the control panel is detached, for qualified technicians only)
EXTERNAL ON/OFF/SWITCH, ALARM SIGNAL ON/OFF, SHADE TIME, AUTO-
SHADE TIME, EXPERT MODE, RAIN/TEMP
(Processing of external signals, processing of alarm signals)
EXTERNAL SWITCH
RAIN/TEMP
1. You have confirmed the function RUNNING TIME. EXTERNAL SWITCH
appears. (EXTERNAL SWITCH/ON/OFF denotes the external control sig-
nals. Factory default is EXTERNAL SWITCH)
2. You can select the required settings for the control inputs using the +/-
buttons.
3. Confirm your selection with OK.
The interactive window "ALARM SIGNAL" is only displayed if
you have selected DRIVE CONTROLLER.
4. ALARM SIGNAL ON appears. (ALARM SIGNAL ON is the factory default)
5. You can switch the ALARM SIGNAL ON or OFF using the +/- buttons.
Confirm with OK.
6. The ALARM SIGNAL ON/OFF function is now set.
7. AUTO-SHADE TIME appears.
8. You can choose between SHADE TIME and AUTO SHADE TIME using the
+/- buttons.
9. EXPERT MODE OFF appears.
10. You can select the desired setting using the +/- buttons.
11. Confirm your selection with OK. RAIN/TEMP appears.
12. You can choose between RAIN/TEMP and GROUP using the +/- buttons.
13. Confirm your selection with OK.
14. For details on further programming in the FUNCTION menu, please con-
tinue reading.
ALARM SIGNAL
AUTO SHADE TIME
EXPERT MODE
55 - en