Becker Centronic SunWindControl SWC62 Assembly And Operating Instructions Manual page 46

SUMMER/WINTER
SUMMER/WINTER denotes the automatic summer/winter time adjustment.
Factory setting is ON; the unit adapts automatically.
Function menu
This mode is only intended for use by qualified technicians (only visible when
the control panel is detached)
In the FUNCTION menu you can set the following functions:
•
AWNING/VENETIAN BLIND (selection of the shading solution)
•
DRIVE/GROUP CONTROLLER
• RUNNING TIME
•
EXTERNAL SWITCH/ON/OFF
•
ALARM SIGNAL ON/OFF
•
SHADE TIME/AUTO SHADE TIME
•
EXPERT MODE OFF/ON
•
RAIN/TEMP / GROUP
•
INITIAL OPERATION (for service purposes)
•
RELAY (for service purposes)
•
TOTAL RUNNING TIME (for service purposes)
DRIVE CONTROLLER
The drive is connected directly to the control unit.
GROUP CONTROLLER
The control unit controls a group.
EXTERNAL OFF / EXTERNAL ON / EXTERNAL SWITCH
EXTERNAL OFF
EXTERNAL ON
EXTERNAL SWITCH
46 - en
Group inputs are always switched off.
Group inputs are always switched on.
Group inputs are switched on in Auto mode
and switched off in Manual mode.