Specifications; Warranty Information; Copyright; Changes - NTI ENVIROMUX Series Installation Instruction

4. The Status page for the noise level sensor should appear.
5. Click on the "Configure" button and enter desired values in the page that pops-up. See the SYSTEM manual for your respective
unit for description of all field values.

Specifications:


Connections: RJ45

Supports 18-24AWG CAT5/5e/6 cable up to 1,000 feet

Compatibility: E-2D with Firmware v1.7 or later

E-5D

E-16D with Firmware v1.1 or later

Range: 33-116dB

Accuracy: 1kHz +3dB / 100Hz-10kHz + 6dB

Environmental: 0-70°C Operating Temperature (17-90% non-condensing relative humidity)

Powered by E-2D, -5D, or -16D

Warranty Information

The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network
Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at
information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.

COPYRIGHT

Copyright © 2012-2018 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without
the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.

CHANGES

The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the right
to make changes in the product design without reservation and without notification to its users.
http://www.networktechinc.com
Man175 Rev 6/14/18
for