Extended "At*" Command Set - ZyXEL Communications ACCESSING INTERNET & INTRANET omni series User Manual

Command Options Function & Description
n=7
&ZI?
&ZO?
&ZOn=x

Extended "AT*" Command Set

Command Options Function & Description
*Dn n=0-39 Set default dial pointer at telephone
*D0 *
*Gn
*G0 *
*G1
*G2
*G3
*G4
*G5
122 AT Command Set Reference
Assign the phone number 's' for the
analog adapter, phone 2.
Display the phone number (including
subaddress , if any) for various B
channel protocols.
Display the &ZOn setting.
Write own phone number (including
sub-address, if any). The number
specified will be used as the calling
party number whiling dialing. Value
for "n"
I = ISDN data
A= analog adapter, Phone 1
B= analog adapter, Phone 2
directory location n.
(See also S35.4 and S38.0)
Security function selection.
Disable security function.
Enable type 1 security, with password
check (ZyXEL to ZyXEL only).
Enable type 1 security, with password
check and call back (ZyXEL to
ZyXEL only).
Enable type 2 security, with password
check.
Enable type 2 security, with password
check and call back.
Enable type 2 security, with password
check and call back, remote site enters
the call back number.
Ref.
Ref.
S29
S36.5-7