Table of Contents
Advertisement
Figure 2-2 Connecting the omni.net to Your Computer
Complete the following steps to connect the TA to your computer:
1. Turn off the power to your computer.
2. Find the 25 pin serial port.
3. Connect the male end of the 25 pin cable to the serial port.
4. Connect the other end of the cable (female end) to your
computer's serial port. In case your computer only supplies a 9
pin serial connector, you will need to use a 25 pin to 9 pin
converter (9 pin female to 25 pin male).
5. Once the connection is made, turn the computer back on.
Installing omni External Models 11
Advertisement
Table of Contents
