Table of Contents
Advertisement
recommend that you check with your ISP to verify the protocol
they use.
If you are connecting to an Internet Service Provider (ISP), select:
ZyXEL omni (your model), PPP 64K
If the ISP has not upgraded to an ASEND compatible server, select:
ZyXEL omni (your model), V.120 64K
If you are calling another location such as a BBS system, select:
ZyXEL omni (your model), V.120 64K
If you dial up to CompuServe, select:
ZyXEL omni (your model), V.120 64K
If you are calling MicroSoft Network's (MSN) ISDN line, select:
ZyXEL omni (your model), PPP 64K
After you have completed the selections above, click Next.
1. Select the COM port your TA is connected to and click Next. A
final dialog will appear. Click Finish. You should see a window
similar to the one below:
Setup for Windows 95 and NT 4.0 37
Advertisement
Table of Contents
