Description Of Ati3 Output - ZyXEL Communications ACCESSING INTERNET & INTRANET omni series User Manual

Command Options Function & Description
UPX
Vn
V0
V1 *
Xn n=0-7
5 *
Zn n=0-4
Zn
Z4
$

Description of ATI3 Output:

The Link Status Report output appears as follows:
ZyXEL ISDN TA LINK STATUS REPORT
Connect DTE Speed
Error Control Level
Protocol Link Speed
Octets Received
Octets Sent
Cause
Cause Value
HDLC FCS Error
HDLC Receive Over-run
HDLC Transmit Under-run
Output Parameter
Download firmware to the Flash
EPROM using Xmodem protocol.
Sets display type for Result Codes.
Display result code in numeric
form. (See also S35.7 and the result
code table of 'ATXn').
Display result code in verbose
form.
Result code options, see the
Options Table.
Reset TA and set power-on profile. S15.5-7
Reset TA and load user profile n
(0-3).
Reset TA and load factory settings.
Basic command summary help.
Output Value Description
AT Command Set Reference 117
:
:
:
: 0
: 0
:
: 0
: 0
: 0
: 0
Ref.
S23.6
S23.3-5