Call Broker; Call Reject; Call Transfer; Three-Way Conference Call - ZyXEL Communications ACCESSING INTERNET & INTRANET omni series User Manual

To accept the call, press the Flash key and 0 to accept the second
call and place the first call on hold.
Accept the second call: H Flash è H #0
To reject the second call press the Flash key and 5.
Reject the second call: H Flash è H #5
To establish a three way conference call press the Flash key and
3.
Establish a conference call: H Flash è H #3

Call Broker

The call broker feature enables you to switch back and forth between
the first and second calls by pressing the Flash key and 0.
Call Broker: H Flash è H #0

Call Reject

To disconnect an active call and return to a call that is on hold press
the Flash key and 5. This allows you to disconnect a call without
hanging up your handset.
Call Reject: H Flash è H#5

Call Transfer

The call transfer feature enables you to transfer a call to another local
phone by pressing the Flash key and 2 and then hanging up the
handset.
Call Transfer: H Flash è H#2 è (ò

Three-way Conference Call

The conference call feature can be used in the two ways. To connect
two local parties to a remote party, or to connect one local party to
two remote parties.
Handling Analog Calls (non-data) 77