Figure 21 Wireless Lan: 802.1X/Wpa For 802.1X Protocol; Table 17 Wireless Lan: 802.1X/Wpa For 802.1X Protocol - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

Figure 21 Wireless LAN: 802.1x/WPA for 802.1x Protocol

The following table describes the labels in this screen.

Table 17 Wireless LAN: 802.1x/WPA for 802.1x Protocol

LABEL
Wireless Port
Control
ReAuthentication
Timer (In
Seconds)
Idle Timeout
(In Seconds)
Key Management
Protocol
Chapter 6 Wireless LAN
DESCRIPTION
To control wireless stations access to the wired network, select a control method
from the drop-down list box. Choose from No Authentication Required,
Authentication Required and No Access Allowed.
No Authentication Required allows all wireless stations access to the wired
network without entering usernames and passwords. This is the default setting.
Authentication Required means that all wireless stations have to enter
usernames and passwords before access to the wired network is allowed.
No Access Allowed blocks all wireless stations access to the wired network.
The following fields are only available when you select Authentication Required.
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. This field is activated only when you select
Authentication Required in the Wireless Port Control field.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes).
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
The G-1000 automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
This field is activated only when you select Authentication Required in the
Wireless Port Control field. The default time interval is 3600 seconds (or 1 hour).
Choose 802.1x from the drop-down list.
G-1000 User's Guide
63