Security: 802.1X Static 64-Bit, 802.1X Static 128-Bit - ZyXEL Communications NWA-3500 User Manual

Chapter 10 Wireless Security Screen

10.2.3 Security: 802.1x Static 64-bit, 802.1x Static 128-bit

Use this screen to set the selected profile to 802.1x Static 64 or 802.1x Static 128
security mode. Select 802.1x Static 64 or 802.1x Static 128 in the Security
Mode field to display the following screen.
Figure 91 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
The following table describes the labels in this screen.
Table 41 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
LABEL
Profile Name
Security Mode
ASCII
Hex
Key 1 to Key 4
162
DESCRIPTION
Type a name to identify this security profile.
Choose 802.1x Static 64 or 802.1x Static 128 in this field.
Select this option to enter ASCII characters as the WEP keys.
Select this option to enter hexadecimal characters as the WEP
keys.The preceding "0x" is entered automatically.
If you chose 802.1x Static 64, then enter any 5 characters (ASCII
string) or 10 hexadecimal characters ("0-9", "A-F") preceded by
0x for each key.
If you chose 802.1x Static 128-bit, then enter 13 characters
(ASCII string) or 26 hexadecimal characters ("0-9", "A-F")
preceded by 0x for each key.
There are four data encryption keys to secure your data from
eavesdropping by unauthorized wireless users. The values for the
keys must be set up exactly the same on the access points as they
are on the wireless stations.
The preceding "0x" is entered automatically. You must configure all
four keys, but only one key can be activated at any one time. The
default key is key 1.
NWA-3500/NWA-3550 User's Guide