Figure 82 Menu 24.10 System Maintenance: Time And Date Setting; Table 56 System Maintenance: Time And Date Setting - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

G-1000 User's Guide

Figure 82 Menu 24.10 System Maintenance: Time and Date Setting

The following table describes the fields in this menu.

Table 56 System Maintenance: Time and Date Setting

FIELD
Time Protocol
Time Server Address
Current Time
New Time
Current Date
New Date
Time Zone
Daylight Saving
Start Date
End Date
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to
Cancel" to save your configuration, or press [ESC] to cancel.
The G-1000 resets the time in three instances:
1 On leaving menu 24.10 after making changes.
132
Menu 24.10 - System Maintenance - Time and Date Setting
Time Protocol= NTP (RFC-1305)
Time Server Address= 128.105.39.21
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd):
End Date (mm-dd):
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Enter the time service protocol that your time server sends when you turn on
the G-1000. Not all time servers support all protocols, so you may have to
check with your ISP/network administrator or use trial and error to find a
protocol that works. The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None. The default, enter the time manually.
Enter the IP address or domain name of your time server. Check with your ISP/
network administrator if you are unsure of this information.
This field displays an updated time only when you reenter this menu.
Enter the new time in hour, minute and second format.
This field displays an updated date only when you re-enter this menu.
Enter the new date in year, month and day format.
Press [SPACE BAR] and then [ENTER] to set the time difference between your
time zone and Greenwich Mean Time (GMT).
If you use daylight savings time, then choose Yes.
If using daylight savings time, enter the month and day that it starts on.
If using daylight savings time, enter the month and day that it ends on
05 : 47 : 19
05 : 47 : 17
2000 - 01 – 01
2000 - 01 – 01
01 – 01
01 – 01
Chapter 19 System Maintenance and Information