Remote Management Screens; Remote Management Overview; Remote Management Limitations - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

G-1000 User's Guide

Remote Management Screens

This chapter provides information on the Remote Management screens.

8.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which G-
1000 interface (if any) from which computers.
You may manage your G-1000 from a remote location via:
• WLAN only
• LAN only
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The G-1000
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP

8.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:
1 A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet,
FTP or Web service.
2 You have disabled that service in one of the remote management screens.
3 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the G-1000 will disconnect the session immediately.
4 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
72
C
• ALL (LAN and WLAN)
• Neither (Disable).
H A P T E R
Chapter 8 Remote Management Screens
8