Snmp; Figure 31 Remote Management: Ftp; Table 27 Remote Management: Ftp - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

G-1000 User's Guide

Figure 31 Remote Management: FTP

The following table describes the labels in this screen.

Table 27 Remote Management: FTP

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

8.6 SNMP

Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your G-1000 supports SNMP agent functionality, which allows a manager
station to manage and monitor the G-1000 through the network. The G-1000 supports SNMP
version one (SNMPv1) and version two (SNMPv2c). The next figure illustrates an SNMP
management operation. SNMP is only available if TCP/IP is configured.
Note: SNMP is only available if TCP/IP is configured.
76
DESCRIPTION
You may change the server port number for a service, if needed; however, you
must use the same port number in order to use that service for remote
management.
Select the interface(s) through which a computer may access the G-1000 using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the G-
1000 using this service.
Select All to allow any computer to access the G-1000 using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the G-1000 using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 8 Remote Management Screens