ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual page 80

G-1000 User's Guide
Table 30 Remote Management: SNMP
LABEL
Set Community
Trap
Community
Destination
SNMP
Service Port
Service Access
Secured Client IP
Address
Apply
Reset
80
DESCRIPTION
Enter the Set community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
You may change the server port number for a service, if needed; however, you
must use the same port number in order to use that service for remote
management.
Select the interface(s) through which a computer may access the G-1000 using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
G-1000 using this service.
Select All to allow any computer to access the G-1000 using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the G-1000 using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 8 Remote Management Screens