Security: 802.1X Static 64-Bit, 802.1X Static 128-Bit - ZyXEL Communications NWA-3166 User Manual

The following table describes the labels in this screen.
Table 37 Security: 802.1x Only
LABEL
Profile Name
Security Mode
ReAuthenticatio
n Timer
Idle Timeout
Apply
Reset

10.2.3 Security: 802.1x Static 64-bit, 802.1x Static 128-bit

Use this screen to set the selected profile to 802.1x Static 64 or 802.1x Static 128
security mode. Select 802.1x Static 64 or 802.1x Static 128 in the Security
Mode field to display the following screen.
Figure 80 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
NWA-3166 User's Guide
DESCRIPTION
Type a name to identify this security profile.
Choose 802.1x Only in this field.
Specify how often wireless stations have to resend user names and
passwords in order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time
interval is 1800 seconds (30 minutes). Alternatively, enter "0" to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
The NWA automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter
the user name and password again before access to the wired network
is allowed.
The default time interval is 3600 seconds (or 1 hour).
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Chapter 10 Wireless Security Screen
135