Back To Factory Defaults; Restart Screen; Figure 46 Configuration Upload Error; Figure 47 Reset Warning Message - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

Figure 46 Configuration Upload Error

10.5.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the G-1000 to its factory defaults as shown on the screen. The following warning
screen will appear.

Figure 47 Reset Warning Message

You can also press the RESET button on the side panel to reset the factory defaults of your G-
1000. Refer to the section on resetting the G-1000 for more information on the RESET button.

10.6 Restart Screen

System restart allows you to reboot the G-1000 without turning the power off. Click
MAINTENANCE, and then click Restart to have the G-1000 reboot. This does not affect the
G-1000's configuration.

Figure 48 Restart Screen

Chapter 10 Maintenance
G-1000 User's Guide
93