Figure 22 Wireless LAN: 802.1x/WPA for WPA Protocol
The following table describes the labels not previously discussed
Table 18 Wireless LAN: 802.1x/WPA for WPA Protocol
LABEL
Key Management
Protocol
WPA Group Key
Update Timer
Authentication
Databases
Apply
Reset
Please
see Table 17
6.7.3 Authentication Required: WPA-PSK
Select Authentication Required in the Wireless Port Control field and WPA-PSK in the
Key Management Protocol field to display the next screen.
Chapter 6 Wireless LAN
DESCRIPTIONS
Choose WPA in this field.
The WPA Group Key Update Timer is the rate at which the AP (if using WPA-
PSK key management) or RADIUS server (if using WPA key management) sends
a new group key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the WPA Group Key Update Timer is also supported in
WPA-PSK mode. The G-1000 default is 1800 seconds (30 minutes).
This field is disabled.
Click Apply to save your changes back to the G-1000.
Click Reset to begin configuring this screen afresh.
for information on the additional fields shown in this screen.
G-1000 User's Guide
65