Wireless Lan Setup; Figure 54 Menu 3.2 Tcp/Ip Setup; Table 42 Menu 3.2 Tcp/Ip Setup - ZyXEL Communications ZyXEL ZyAIR G-1000 User Manual

Figure 54 Menu 3.2 TCP/IP Setup

Follow the instructions in the following table on how to configure the fields in this menu.

Table 42 Menu 3.2 TCP/IP Setup

FIELD
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
When you have completed this menu, press [
save your configuration, or press [

13.3 Wireless LAN Setup

Use menu 3.5 to set up your G-1000 as the wireless access point. To edit menu 3.5, enter 3
from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then
press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next.
Chapter 13 LAN Setup
Menu 3.2 - TCP/IP Setup
IP Address Assignment= Static
IP Address= 192.168.1.2
IP Subnet Mask= 255.255.255.0
Gateway IP Address= 0.0.0.0
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select Dynamic to have the G-1000
obtain an IP address from a DHCP server. You must know the IP address assigned
to the G-1000 (by the DHCP server) to access the G-1000 again.
Select Static to give the G-1000 a fixed, unique IP address. Enter a subnet mask
appropriate to your network and the gateway IP address if applicable.
Enter the (LAN) IP address of your G-1000 in dotted decimal notation
Your G-1000 will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the G-1000.
Type the IP address of the gateway. The gateway is an immediate neighbor of your
G-1000 that will forward the packet to the destination. On the LAN, the gateway
must be a router on the same network segment as your G-1000.
ENTER
ESC
] at any time to cancel.
] at the prompt "Press ENTER to Confirm..." to
G-1000 User's Guide
101