ZyAIR Access Point Series User's Guide
The following table describes the labels in this screen.
LABEL
Wireless LAN Setup
ESSID
Choose Channel
ID
Scan
3-4
Figure 3-2 Wizard 2 : Wireless LAN Setup
Table 3-2 Wizard 2 : Wireless LAN Setup
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the ZyAIR, make sure all wireless stations use the same
ESSID in order to access the network.
To manually set the ZyAIR to use a channel, select a channel from the drop-down list
box. Open the Channel Usage Table screen to make sure the channel is not already
used by another AP or independent peer-to-peer wireless network.
To have the ZyAIR automatically select a channel, click Scan instead.
Click this button to have the ZyAIR automatically scan for and select a channel with
the least interference.
DESCRIPTION
Wizard Setup