The Any Port Any Service Edit Screen - ZyXEL Communications VMG1312-T10C User Manual

11.2.2 The Any Port Any Service Edit Screen

This screen lets you create or edit a dynamic port binding group. Click the Edit icon of a port
binding group in the Port Binding: Any Port Any Service screen to open the following screen.
Figure 98 Any Port Any Service: Add/Edit
The following table describes the labels in this screen.
Table 56 Any Port Any Service: Add/Edit
LABEL
Interface
Source MAC
MAC address
MAC mask
DHCP Option60
VendorClassId
VMG1312-T10C User's Guide
DESCRIPTION
Select the WAN interface of the port binding group.
If you want to configure the port binding group by the source MAC address of the
packet, select this check box and enter the MAC address and MAC mask.
Enter the source MAC address of the packet.
Type the mask for the specified MAC address to determine which bits a packet's MAC
address should match.
Enter "f" for each bit of the specified source MAC address that the traffic's MAC address
should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can
be of any hexadecimal character(s). For example, if you set the MAC address to
00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of
00:13:49:12:34:56 matches this criteria.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched
traffic, such as the type of the hardware or firmware.
Enter the Vendor Class Identifier of the matched traffic.
Chapter 11 Port Binding
143