Troubleshooting > Troubleshooting When Discharging Paper
3
Remedy 2: Adjust the paper pull-in timing for the 3rd and the 4th and subsequent sheets
If there is a gap in the pull-in timing of the sheets up to the 2nd sheets, adjust pull amount.
1
2
3
The edge of a stack papers is misaligned
1
2
Item
Jogger(A3)
Jogger(B4)
Jogger(A4R)
Jogger(A4E)
Jogger(A5R)
Item
09 Save Drum(2nd F)
10 Save Drum(3rd C)
11 Save Drum(2nd C)
If the second sheet is out of position, adjust10 Save Drum(3rd C)].
Press the [Start] key > [Stop] key.
[Home] key > [...] > [Professional Settings] > [246 Adjust
Finisher] > [Finisher] > [13 Pull Amount]
Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
Item
13 Pull Amount
Press the [Start] key > [Stop] key.
[Home] key > [...] > [Professional Settings] > [246 Adjust
Finisher] > [04 Stacker1] or [05 Stacker2]
Adjust the setting value using [+], [-] key and numeric keypad.
The range of the set value is as follows.
Description
Adjust the alignment position of
A3 paper.
Adjust the alignment position of
B4 paper.
Adjust the alignment position of
A4R paper.
Adjust the alignment position of
A4E paper.
Adjust the alignment position of
A5R paper.
Range
-15 to 15
-15 to 15
-15 to 15
Range
0 to 30
Range
-30 to +30
-30 to +30
-30 to +30
-30 to +30
-30 to +30
4-61
Default
Amount of change
0
0.15 mm
0
0.15 mm
0
0.15 mm
Default
Amount of change
0
2 msec
Default
Amount of change
0
0.1 mm
0
0.1 mm
0
0.1 mm
0
0.1 mm
0
0.1 mm